+

Lower Limb Joint Rehabilitation Device


Product Introduction

Microcomputer CPU control, automatic overtorque reversal function

Product Introduction


1. Digital circuit, microcomputer control, LCD large screen LCD screen display movement angle, time, speed.

2. Overload automatic reverse protection function.

3. Knee, ankle, hip can exercise.

4. The length adjustable range of the thigh support of the rehabilitation device is not less than 90mm, and the length adjustable range of the calf support is not less than 100mm.

5. The adjustment range of rehabilitation device:

1) The maximum change range of the angle (α) between the large and small leg supports is not less than 125 °

2) The change range of the front and rear turning corner (β) of the foot support plate shall not be less than 40 °, and the change range of the left and right movement angle (γ) shall not be less than 40 °.

6. The rated load of the rehabilitation device is 200N, and it shall be able to work smoothly without jamming under the rated load, and there shall be no abnormal impact sound during reciprocating operation.

7. The working noise of the whole rehabilitation device should not be greater than 65dB.

8. The angular velocity adjustment range of the included angle (α) of the leg support of the rehabilitation device: the minimum speed is not more than 1/s, the maximum speed is not less than 2.5/s, and the gear is adjustable (more than 6 gears).

9. The rehabilitation device can work continuously for more than 2h under 200N load.

10. The rehabilitator is equipped with a manual control member so that the patient can control the rehabilitator to pause or perform stretching exercises (α to 180 °).

11. When the rehabilitation device is turned on, the extension movement occurs after pressing the start button, that is, the angle (α) between the large and small leg supports moves to 180 ° (extension position).

12. The input power of the rehabilitation device is 70VA.

13. Rated working voltage: 220Vac ± 22V

14. Simple operation, with simple ankle rehabilitation function

15. With torque protection function

16. Using 50cm ball screw, the longest running time is 240 minutes

Key words:

Online message

Leave a message online and get the product quotation free of charge. We will arrange the specialist to contact you as soon as possible.